Brand: Bosch Category: Trimmer Size: 2.91 MB

Brand: Bosch Category: Trimmer Size: 3.16 MB

Brand: Bosch Category: Trimmer Size: 0.31 MB

Operating Controls4

Assembly5

Cutting And Edging10

Spool Maintenance10

After Trimming/Storage11

Environmental Protection12

Table Of Contents17

Brand: Bosch Category: Trimmer Size: 1.52 MB

Assembly3

Cutting And Edging5

Spool Maintenance6

Technical Data9

After Trimming/storage12

Table Of Contents14

Brand: Bosch Category: Trimmer Size: 1.07 MB

Bosch Categories

More Bosch Manuals...

[. . . ] S Take care against injury from the blade fitted for cutting the nylon line length. After feeding line always return the trimmer to its normal operating position before switching on. S Switch off and remove the plug from the socket: ­ whenever you leave the machine unattended for any period ­ before replacing the spool ­ if the cable is entangled ­ before cleaning or working on the line trimmer. Switch off and remove plug from mains before adjusting, cleaning or if the cable is entangled and before leaving the trimmer unattended for any period. [. . . ] Extension cords/leads should only be used if they comply with H05VV-F or H05RN-F types. Products sold in GB only: Your product is fitted with an approved 13 A (BS 1363/A) electric plug and is protected by a 3 A fuse (ASTA Approved to BS 1362). If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a 13 A socket elsewhere. Note: The position of the wheels can be adjusted by loosening the wingnut 18 and moving to the desired position. B3 The wheels can be moved up and down the shaft 6 depending on the height of cut required. Pull the shaft out to increase the height, or push E Adjusting cutting head angle: To change the angle depress the foot pedal 12 and move the shaft 6 to the desired position. Do not connect the machine to the mains socket before it is completely assembled. A Mounting the Cutting Guard Place the cutting guard 10 on the trimmer head 7. Turn the shaft 6 90° to position the trimmer head 7 for trimming/edging as shown. Remove stones, loose pieces of wood and other objects from the cutting area. The cutting line continues to rotate for a few seconds after the trimmer is switched off. Allow the motor/cutting line to stop rotating before switching 'on' again. I Cutting Grass Move the trimmer left and right, keeping it well away from the body. When the line breaks off completely, feed twice to regain the full cutting circle. M If the line is exceeding the maximum cutting circle it will be cut by the blade 24 integrated in the cutting guard 10. Note: To ensure long and reliable service, carry out the following maintenance regularly. If the trimmer should happen to fail despite the care taken in manufacture and testing, repair should be carried out by an authorized customer service agent for Bosch garden products. For all correspondence and spare parts orders, always include the 10-digit part number (TYP) from the nameplate of the machine! Cutting Very Long Grass/Weeds The product is supplied with Extra Strong Line and a fixing spool, fit as described in spool maintenance. Fitting the Extra Strong Line for very long tough conditions will improve the performance and give better results. Do not allow the cutting line to contact paved surfaces, stones or garden walls, since this will wear the line rapidly. [. . . ] Warning: Switch off and remove plug from mains before investigating fault. Symptom Machine fails to operate Possible Cause Power turned off Mains socket faulty Extension cable damaged Fuse faulty/blown Extension cable damaged Machines internal wiring damaged Machine labours Machine is not cutting Line can not be fed Line keeps breaking Grass too high Line too short/broken off Spool empty Line inside the spool entangled Line inside the spool entangled Trimmer used incorrectly Remedy Turn power on Use another socket Inspect cable, replace if damaged Replace fuse Inspect cable, replace if damaged Contact Service Agent Contact Service Agent Cut in stages Feed the line manually/automatically Replace the spool Inspect the spool, rewind if necessary Inspect the spool, rewind if necessary Only trim with the tip of the line, avoid stones, walls and other hard objects. Power tools, accessories and packaging should be sorted for environmental-friendly recycling. Only for EC countries: Do not dispose of power tools into household waste! [. . . ]